Skip to main content

City Collective

Project Introduction

City Collective led the urban design, architecture, interiors and landscape architecture for Uniting on Second, a 70-dwelling affordable housing development in Bowden, South Australia. Delivered in close collaboration with UnitingSA and Kennett Builders, the project progressed from Renewal SA EOI and concept design through to completion, with a clear emphasis on affordability, buildability and long-term performance. Comprising 46 affordable rental homes retained by UnitingSA and 24 affordable market sale dwellings, the development demonstrates that high-density affordable housing can achieve strong architectural character and urban contribution while meeting and exceeding Bowden’s Urban Design Guideline requirements.

Key Project Challenges

The project was shaped by a number of significant constraints. Under the Renewal SA EOI process, the scheme was required to deliver a high-density affordable housing outcome within strict urban design and sustainability parameters, including a 5-Star Green Star target and delivery within defined programme timeframes. The design review and planning approval process was completed within a two-month period, requiring efficient coordination across all disciplines.

The site itself, a tightly constrained 17m x 74m parcel, presented minimal setbacks, active streets and pedestrian interfaces on all four sides, level changes across the footprint and limited space for on-site parking. As a true 360-degree building condition, every elevation was required to contribute equally in terms of activation, durability and material quality. Integration of existing and new infrastructure further increased complexity. All of this was achieved while maintaining affordability and deliberately avoiding high-cost solutions such as basements, car stackers or lift-dependent parking systems.

Key Project Innovations

Highly efficient site planning maximised yield and amenity within the constrained footprint, achieving strong building efficiency while complying with Renewal SA design guidelines. A single-loop parking solution eliminated the need for basement construction, significantly reducing cost and construction risk.

The ground level is activated through a generous foyer, bike workshop, secure bicycle storage and high-quality material interfaces to surrounding streets. Communal amenity is distributed throughout the building, with shared spaces on each level and a rooftop garden terrace supporting social connection and resident wellbeing.

A contextual material strategy incorporating precast concrete with form-liner patterning and brick façades, responds to Bowden’s industrial character while minimising long-term maintenance. Passive design principles, including cross-ventilation, open-air circulation and high-performance building fabric, support operational efficiency and long-term sustainability outcomes. Large balconies with direct connections to living and bedroom spaces, along with generous storage provision at both dwelling and communal levels, reinforce liveability. Efficient construction methodologies, including pre-finished precast wall systems and pre-stressed concrete plank flooring, ensured programme certainty while maintaining design integrity.

Client
UnitingSA, Kennett

Location
Bowden, SA, AU

Primary sector
Housing & Mixed-Use

Value
$35M AUD

Project years
2023 – Current

Services provided
Urban Design, Architecture, Landscape Architecture, Interior Design

Project team
Project Director –
David Cooke
Project Architect – Terry Boxall
Design Lead – Sam Wiechula

  • Client: Uniting SA / Renewal SA
  • Location: Adelaide, SA, AU
  • Primary Sector: Housing + Mixed-Use
  • Construction Value: $8M AUD
  • Project Years: 2022-2023
  • Services Provided: Architecture, Urban Design, Landscape Architecture, Interior Design
  • Project Team:
    Principal-in-Charge – David Cooke
    Project Manager – Terry Boxall
    Design Lead – Sam Wiechula

Collaborators: